LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1991 >> Talon Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Abs Power Relay Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Abs Power Relay Test

  1. Remove ABS power relay from behind right rear quarter trim panel. See ELECTRONIC CONTROL UNIT (ECU) & ABS POWER RELAY  under REMOVAL & INSTALLATION. Disconnect ABS power relay connector. Using ohmmeter, check for continuity between ABS power relay connector terminals No. 1 and 3. See Fig 1 . If continuity does not exist, go to next step. If continuity exists, replace relay.
  2. Check for continuity between terminals No. 2 and 4. If continuity exists, go to next step. If continuity does not exist, replace relay.
  3. Connect positive lead of 12-volt power source to terminal No. 2 and negative lead to terminal No. 4. Check for continuity between terminals No. 1 and 3. If continuity exists, relay is okay. If continuity does not exist, replace relay.
Fig 1: Testing ABS Power Relay
G91G08042Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals