October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Injected Engines
- Locate ignition timing adjustment connector. See IGNITION TIMING ADJUSTMENT CONNECTOR LOCATION
in this article. Connect jumper wire between ignition timing adjustment connector and ground.
- Check ignition basic timing. If ignition basic timing is not within specification, loosen distributor (or crank angle sensor on engines with dual coil assembly) and rotate to adjust timing as necessary. For ignition basic timing specification, see IGNITION TIMING SPECIFICATIONS
.
- Disconnect jumper wire from ignition timing adjustment connector.