Valve Body: Disassembly
- Unplug the electrical connectors (1, 2) at the valve body.
- Remove the bolts (1) at the transfer plate (2) and remove the transfer plate.
- Turn valve body over and remove the solenoid module (1) from the valve body (2).
- Remove the bolts (1) at the line pressure sensor (2).
- Remove the line pressure sensor from the valve body.
- Remove the bolt (1) at the pressure control solenoid (2).
- Remove the bolts (1) at the clamping plate (2).
- Remove the clamping plate (1).
- Remove the valve body cover (1).
- Remove the valve body inner gasket and plate (1) from the valve body.NOTE:
The valve body contains some check balls that are pressed into a tapered bore (1). These check balls are not removable.
NOTE:Locations of check balls are very important. Please note the location of these check balls for proper installation.
- Remove the check balls (2) if equipped.
1 - CONVERTER CLUTCH SWITCH VALVE 6 - MANUAL VALVE 2 - L/R SWITCH VALVE 7 - PRESSURE REGULATOR VALVE 3 - SOLENOID SWITCH VALVE 8 - TORQUE CONVERTER REGULATOR VALVE 4 - DC SWITCH VALVE 9 - CONVERTER CLUTCH CONTROL VALVE 5 - LC SWITCH VALVE NOTE:Use exploded view for disassembly.
NOTE:Tag all valve/spring assemblies for reassembly identification.
- Remove valves from valve body.