LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Durango R/T, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Active Damping Control (ADCM) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module, Active Damping Control (ADCM): Installation

GC0145747Courtesy of CHRYSLER GROUP, LLC
  1. Connect the Active Damping Control Module (ADCM) wire harness connectors.
  2. Slide the ADCM (2) into position making sure the latches secure the ADCM.
  3. From behind/under the left front seat, install the cover panel on the electronic module tub (4).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Perform the ADCM Verification Test. ADCM VERIFICATION TEST


GC0145747Courtesy of CHRYSLER GROUP, LLC
  1. Connect the Active Damping Control Module (ADCM) wire harness connectors.
  2. Slide the ADCM (2) into position making sure the latches secure the ADCM.
  3. From behind/under the left front seat, install the cover panel on the electronic module tub (4).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Perform the ADCM Verification Test. Refer to: ADCM VERIFICATION TEST
scientia non olet · About LEMON Manuals