LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger SXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node (Kin) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Keyless Ignition Node (Kin): Installation

GC0145001Courtesy of CHRYSLER GROUP, LLC
NOTE:

Mid ICS shown, base similar.

  1. Push the Keyless Ignition Node (KIN) into the instrument panel until it snaps into place.
  2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
  3. Install the instrument cluster bezel (2). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
scientia non olet · About LEMON Manuals