Charging System (Service Information): Generator: Removal: 6.2L

WARNING:

Disconnect the negative battery cable before removing the battery output wire (B+ wire) from the generator. Failure to do so can result in injury or damage the electrical system.

Disconnect and isolate the negative battery cable (1).
Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
Raise and support the vehicle.
Remove the belly pan retainers (1) and remove the belly pan.

Courtesy of CHRYSLER GROUP, LLC
Depress the field wire connector tab (1) at the rear of the generator and disconnect the field wire connector.
Remove the insulator cover (2) from B+ output terminal at the rear of the generator.
Remove the B+ terminal retaining nut (3) at the rear of the generator and remove the B+ terminal.
Unsnap the plastic insulator cap from B+ output terminal at the rear of the generator.
Remove the B+ terminal retaining nut at the rear of the generator and remove the B+ terminal.
Depress the field wire connector tab at the rear of the generator and disconnect the field wire connector.

Courtesy of CHRYSLER GROUP, LLC
Remove the lower generator retaining bolt (1).
Lower the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Remove the upper generator retaining bolts (1) and remove the generator from the vehicle.