LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2014 >> Dart SE, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Powertrain Control >> Installation >> 2.0L/2.4L
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Module, Powertrain Control: Installation: 2.0L/2.4L

Fig 1: PCM Components
GC0155035Courtesy of CHRYSLER GROUP, LLC
CAUTION:

If a new powertrain control module is being installed, use a scan tool to reprogram the new module with the original vehicle identification number (VIN) and original mileage. If this step is not performed, a Diagnostic Trouble Code (DTC) will set.

  1. If removed, position the ground strap (3) onto the most forward lower PCM mounting stud.
  2. Position the PCM onto the mounting studs and tighten the nuts (2, 4) to 5 N.m (44 in. lbs).
  3. Install the PCM electrical connectors (1).
  4. Install the battery negative cable.
    NOTE:

    If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to align the PROXI configuration data into the new ECU. Follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under Body Control Module (BCM) Miscellaneous Functions menu.

scientia non olet · About LEMON Manuals