LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Dart R/T, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Ignition Node >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Ignition Node: Installation: Installation

  1. Connect the wire harness to the ignition node.
  2. Install the ignition node with the four (4) screws.
  3. Install the chin bezel. Refer to CONSOLE, FLOOR, INSTALLATION .
  4. Install the kneeblocker/lower steering column opening trim.
  5. Install the instrument panel end cap.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals