LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Ram Cargo Van V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Fuel Level Sending Unit And Sensor - Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Level Sending Unit And Sensor - Installation






INSTALLATION






NOTE: Correctly position the fuel level sensor to the fuel pump module housing, using the mark made during the removal procedure. Correctly install the positive and negative electrical wire to the fuel level sensor.

1. Correctly position fuel level sensor retaining tabs (1) to fuel pump module housing (2). Press to lock the fuel level sensor into place on the fuel pump module.
2. Install positive electrical wire (4) to fuel level sensor.
3. Install negative electrical wire (3) to fuel level sensor.
4. Install fuel pump module, Fuel Tank - Installation.

scientia non olet · About LEMON Manuals