LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2011 >> Caliber L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Exhaust Pressure Sensor >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






EXHAUST PRESSURE SENSOR





1. Install pressure differential sensor (2). Tighten bolt (1) to 10 Nm (89 in. lbs.).





2. Connect the pressure differential sensor (1) vacuum lines (3).
3. Connect the pressure differential sensor (1) harness connector (2).
4. Connect the negative battery cable.

scientia non olet · About LEMON Manuals