LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Viper SRT-10, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Electronic Control Modules) >> Powertrain Control Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Powertrain Control Module: Installation

WARNING: This page is about a different car, the 2005 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

If the PCM is replaced of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the DRBIII(R) scan tool to change the mileage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set. Refer to POWERTRAIN DIAGNOSTIC PROCEDURES and the DRBIII(R) scan tool.

  1. Install PCM and tighten bolts.
  2. Install the three connector to PCM.
  3. Install the cleaner assembly, refer to ENGINE - 8.3L for more information.
  4. Connect negative battery cable and reprogram radio and clock.
  5. Using DRBIII(R) scan tool, program mileage and vehicle identification number (VIN) into PCM. Refer to the DRBIII(R) scan tool and POWERTRAIN DIAGNOSTIC PROCEDURES .
scientia non olet · About LEMON Manuals