LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Viper SRT-10, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Intermittent Condition, Component Tests, Checking Pcm Power And Ground Circuits, Pcm Verification Test, Pcm/ECM Programming, Pre-Diagnostic Troubleshooting Procedure >> Standard Procedure >> Pcm/ECM Programming >> Module Reprogramming
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module Reprogramming

Replacement PCMs will require programming utilizing the StarSCAN® or equivalent. The PCM will not operate the engine until it is programmed.

CAUTION: Extreme care must be taken when programming a calibration into a generic PCM. Do not randomly select a calibration. Once a calibration is selected and programmed, the controller cannot be reprogrammed to a different calibration. The module can only be reprogrammed to a more recent version of that calibration.
scientia non olet · About LEMON Manuals