LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Durango 4WD V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Seat Temperature Control Module >> Service and Repair >> Front Seats >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation







INSTALLATION





1. Install the heated seat module on the D-pillar (1).
2. Connect the wire harness connector (3) to the heated seat module (2).
3. Reconnect the negative battery cable.
4. Check for proper heated seat system operation.
5. Install the upper and lower D-pillar trim to the vehicle. Installation.
6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals