LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Control Module >> Service and Repair >> Front Seats >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation







INSTALLATION





1. Install the heated seat module on the D-pillar (1).
2. Connect the wire harness connector (3) to the heated seat module (2).
3. Reconnect the negative battery cable.
4. Check for proper heated seat system operation.
5. Install the upper and lower D-pillar trim to the vehicle. Installation.
6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals