LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Durango 3.7 K >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Power Distribution (Service Information) >> Power Distribution - Service Information >> Module-Integrated Power >> Removal >> Integrated Power Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Integrated Power Module

Fig 1: Removing IPM
GC0012507Courtesy of CHRYSLER LLC
  1. Disconnect the negative and positive battery cables.
  2. Unsnap cover and remove the B+ terminal nut from the integrated power module (IPM). Remove the B+ cable.
  3. Remove the IPM from the retaining bracket (1).
  4. Disconnect the connectors from the (IPM).
  5. Remove the Front Control Module (FCM) (2) retaining screws.
  6. Disconnect the front control module by pulling it straight off the integrated power module.
scientia non olet · About LEMON Manuals