LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Caliber SXT, 1.8 C >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Glow Plug >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Glow Plug: Installation

Fig 1: Glow Plugs
GC0053403Courtesy of CHRYSLER LLC
  1. Clean glow plug bay and install glow plug.
  2. Tighten glow plugs to 10 N.m (89 lbs. in.).
  3. Connect glow plug electrical connector.
  4. Install cylinder head cover. Refer to INSTALLATION .
  5. Install engine cover. Refer to INSTALLATION .
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals