LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Caliber SE, 2.0 B >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Sensor-Camshaft Position >> Removal >> Sensor-Rear Camshaft Position
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Sensor-Rear Camshaft Position

Fig 1: REAR CAM SENSOR SHIELD INSTALLED
GC0053381Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Disconnect electrical connector at sensor.
  3. Remove nut retaining heat shield.
    Fig 2: REAR CAM SENSOR SHIELD REMOVED
    GC0053382Courtesy of CHRYSLER LLC
  4. Pull heat shield out to uncover sensor.
  5. Remove mounting bolt.
    Fig 3: CAM SENSOR
    GC0053380Courtesy of CHRYSLER LLC
  6. Remove sensor.
scientia non olet · About LEMON Manuals