LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2006 >> Sprinter 3500, Cab Chassis >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> O2 Sensor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

O2 Sensor: Installation

  1. Install the oxygen sensor. See Figure.
  2. Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
  3. Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals