LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Viper >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery HOLDDOWN >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery HOLDDOWN: Removal

  1. Remove the screws attaching the battery cover and remove the cover.
  2. Disconnect and isolate the negative battery cable.
  3. Remove the single battery hold down retaining fastener.
  4. Remove the battery hold down from the vehicle.
scientia non olet · About LEMON Manuals