LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> SX Sport, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control Modules >> Controller Antilock Brake >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Controller Antilock Brake: Removal

  1. Disconnect battery negative cable.
  2. Raise vehicle.
  3. Disconnect pump/motor connector from CAB (Fig 1).
    Fig 1: Identitying CAB Mounting
    G03537684Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove four screws securing CAB to HCU half of ICU (Fig 1). Remove CAB from HCU.
  5. Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.
scientia non olet · About LEMON Manuals