LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Durango 3.7 K >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Input Speed Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Input Speed Sensor: Installation

  1. Install the input speed sensor into the transmission case.
  2. Install the bolt to hold the input speed sensor into the transmission case. Tighten the bolt to 105 INCH Lbs. (12 N.m).
  3. Install the wiring connector onto the input speed sensor.
  4. Verify the transmission fluid level. Add fluid as necessary. See CHECKING FLUID LEVEL  under LUBRICATION.
  5. Lower vehicle.
scientia non olet · About LEMON Manuals