LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Durango 3.7 K >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Switch-Speed Control >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch-Speed Control: Removal

WARNING: BEFORE ATTEMPTING TO DIAGNOSE, REMOVE OR INSTALL ANY AIRBAG SYSTEM OR RELATED STEERING WHEEL AND STEERING COLUMN COMPONENTS YOU MUST FIRST DISCONNECT AND ISOLATE THE NEGATIVE (GROUND) BATTERY CABLE. WAIT 2 MINUTES FOR SYSTEM CAPACITOR TO DISCHARGE BEFORE FURTHER SYSTEM SERVICE. FAILURE TO DO SO COULD RESULT IN ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY
Fig 1: Removing Speed Control Switch Mounting Screw
G03520592Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate negative battery cable from battery.
  2. Remove airbag module. Refer to AIR BAG RESTRAINT SYSTEMS .
  3. Unplug electrical connector.
  4. Remove speed control switch mounting screw (1) and remove switch from steering wheel.
scientia non olet · About LEMON Manuals