Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT
- DRBIII (diagnostic read out box) scan tool
- Evaporative Emissions Leak Detector # 8404
- Fuel filler adapter # 8382
- Fuel pressure adapter (C-6631) or # 6539
- Fuel pressure kit (C-4799-B) or # 5069
- Fuel pressure tester # 8978
- Fuel release hose (C-4799-1)
- Min air flow fitting # 6714
- Jumper wires
- Ohmmeter
- Oscilloscope
- Vacuum gauge
- Voltmeter
- 12 volt test light minimum 25 ohms resistance with probe # 6801

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.
- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 sensor Signal