LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System & Component Testing >> Programming >> Sentry Key Immobilizer Module >> Programming Ignition Keys To SKIM
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming Ignition Keys To SKIM

  1. Connect DRB-III(R) to Data Link Connector (DLC). Place transmission in Park or Neutral. Turn the ignition on, with the engine off.
  2. Using DRB-III(R), select THEFT ALARM, SKIM THEN MISCELLANEOUS.
  3. Select PROGRAM IGNITION KEYS.
    4. NOTE: A maximum of 8 keys can be learned by each SKIM at one time. Once a key is learned to SKIM, the key cannot be transferred to another vehicle.
  4. Enter secured access mode by entering the vehicle 4-digit Personal Identification Number (PIN). Follow DRB-III(R) prompts. If ignition key programming is unsuccessful, the DRB-III(R) will display one of the following messages:
    • Programming Not Attempted -  The DRB-III(R) attempts to read the programmed key status and there are no keys programmed in the SKIM memory.
    • Programming Key Failed -  The SKIM is unable to program a key because it has a faulty transponder or the key is programmed to another vehicle.
    • 8 Keys Already Learned, Programming Not Done -  SKIM transponder identification memory is full. Obtain up to 8 keys to be programmed. Using the DRB-III(R), erase all ignition keys by selecting MISC and ERASE ALL CURRENT IGN KEYS, then return to step  2 .
    • Learned Key In Ignition -  Ignition key transponder identification is currently programmed in SKIM memory.
scientia non olet · About LEMON Manuals