LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Rear Wheel Speed Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Wheel Speed Sensor: Installation

  1. Connect harness to sensor. Be sure seal is securely in place between sensor and wiring connector. 
  2. Install O-ring on sensor (if removed).
  3. Insert sensor in differential housing.
  4. Install sensor shield.
  5. Install the sensor mounting stud and tighten to 24 N.m (200 in. lbs.).
  6. Install the brake line on the sensor stud and install the nut.
  7. Lower vehicle.
scientia non olet · About LEMON Manuals