LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Front Wheel Speed Sensor >> Installation >> Installation - 2WD
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation - 2WD

  1. Position sensor in the knuckle and install sensor attaching bolts. Tighten bolts to 21 N.m (190 in. lbs.). (Figure).
  2. Secure sensor wire retaining clamps to control arm and fender panel.
  3. In engine compartment, connect sensor wire to harness connector. Make sure wire is routed away from hot or rotating underhood components.
  4. Turn steering wheel back and forth to verify that wire is clear of steering and suspension components.
  5. Remove supports and lower vehicle.
scientia non olet · About LEMON Manuals