LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Programming >> Sentry Keys >> Customer Learn Method
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Customer Learn Method

NOTE: Once a key has been programmed, it cannot be programmed for another vehicle.
  1. Obtain 2 programmed sentry keys from vehicle owner. Ensure new sentry key blank is cut before proceeding. Insert one of the 2 valid sentry keys into ignition switch. Turn ignition on.
  2. After 3 seconds, but no more than 15 seconds, turn ignition off. Remove key. Insert second valid sentry key. Turn ignition on.
  3. About 10 seconds after completion of previous step, SECURITY indicator will flash and a single tone will be heard. This indicates system has entered customer learn programming mode.
  4. Turn ignition off. Remove second valid sentry key. Insert blank sentry key within 60 seconds. Turn ignition on. After about 10 seconds, a single chime will sound. VTSS LED indicator will stop flashing and stay on for about 3 seconds, then turn off to indicate sentry key has been successfully programmed.
  5. SKIS will return to normal operation immediately following exit from customer learn programming mode. Repeat procedure for each additional sentry key to be programmed.
scientia non olet · About LEMON Manuals