LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2000 >> Viper ACR >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Intake Air Temperature Sensor >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect electrical connector from intake air temperature sensor. See Fig 1. Remove sensor.
  2. Install sensor. Tighten to 6 N.m (50 INCH lbs.). Connect electrical connector to sensor.
Fig 1: Intake Air Temperature Sensor
G00059396Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals