State Display Sensors

STATE DISPLAY SENSORS
Connect the DRB scan tool to the vehicle and access the State Display screen. Then access Sensor Display. The following list contains the PCM system functions accessible through the Sensor Display screen.

- Battery Temperature
- Engine Coolant Temperature
- Engine Coolant Temp Sensor
- Throttle Position Volts
- Minimum Throttle
- Knock Sensor Volts
- Battery Voltage
- MAP Sensor Reading
- Idle Air Control Motor Position
- Adaptive Fuel Factor
- Barometric Pressure
- Engine Speed
- Module Spark Advance
- Speed Control Target
- Intake Air Temp Degrees
- Intake Air Temp Volts
- Charging System Goal
- Theft Alarm Status
- Map Sensor Voltage
- Vehicle Speed
- Throttle Opening (percentage)
- TPS Calculated
- Cam Timing Position
- Target Idle
- Time From Start To Run
- Run Time At Stall
- Injector Pulse-width
- Upstream O2S Volts
- Downstream O2S Volts
- Closed Loop Timer
- Short Term Adaptive
- Current Adaptive Cell
- Adaptive Memory Cell 0
- Adaptive Memory Cell 1
- Adaptive Memory Cell 2
- Adaptive Memory Cell 3
- Adaptive Memory Cell 4
- Adaptive Memory Cell 5
- Adaptive Memory Cell 6
- Adaptive Memory Cell 7
- Adaptive Memory Cell 8
- Adaptive Memory Cell 9
- Adaptive Memory Cell 10
- Adaptive Memory Cell 11
- Adaptive Memory Cell 12
- Adaptive Memory Cell 13
- Adaptive Memory Cell 14
- Adaptive Memory Cell 15
- Purge Free Idle Cell
- Purge Free Cell 2 (corresponds to memory cell 2)
- Target IAC Steps
- Retard Cylinder (1)
- Retard Cylinder (2)
- Retard Cylinder (3)
- Retard Cylinder (4)
- Retard Cylinder (5)
- Retard Cylinder (6)