LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Intrepid Base, 3.5 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Direct Ignition System (3.3L & 3.5L) >> Ignition Coil Resistance Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Resistance Test

  1. Remove ignition cables, and measure their resistance (3000-12,000 ohms per foot). Replace cable(s) if necessary. Disconnect ignition coil harness connector. Measure primary coil resistance between B+ (battery) terminal and pin corresponding to cylinder(s) in question. See Figure .
  2. Measure secondary coil resistance between coil towers of grouped cylinders. See CYLINDER GROUP IDENTIFICATION table. Replace ignition coil if primary/secondary coil resistance is not as specified. See IGNITION COIL RESISTANCE table under IGNITION COIL.
CYLINDER GROUP IDENTIFICATION

Application Grouped Cylinders
3.3L & 3.5L 1 & 4; 2 & 5; 3 & 6
scientia non olet · About LEMON Manuals