Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 1992 Plymouth Voyager, 1992 Plymouth Grand Voyager, 1992 Dodge Grand Caravan, 1992 Dodge Caravan, and 1992 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding with diagnosis, certain precautions must be followed. See PRETEST INSPECTION under SELF-DIAGNOSTIC SYSTEM.

Diagnostic test procedures are designed to detect system faults as quickly as possible. Body fault codes are accessed through CCD bus diagnostic connector. See Figure. DRB-II tester is used to access information from CCD bus diagnostic connector. DRB-II tester, jumper wires and volt/ohmmeter will be needed for testing. Proceed to TEST 1A: IDENTIFYING VEHICLE EQUIPMENT & SYSTEM PROBLEMS under SELF-DIAGNOSTIC TESTS. Ensure self-diagnostic tests apply to vehicle being tested. When system problem is identified according to customer complaint, perform indicated diagnostic test.