Coolant Temperature Sensor
- Remove coolant temperature sensor, located near thermostat housing (2-wire connector). Place end of sensor in water. Terminal connector portion of sensor should be .12" (3.0 mm) above water.
- Gradually heat water and read resistance values across terminal connectors. See COOLANT TEMPERATURE SENSOR RESISTANCE table. If not within specification, replace sensor.
COOLANT TEMPERATURE SENSOR RESISTANCE
| Temperature °F (°C) | Ohms |
|---|---|
| 32 (0) | 5900 |
| 68 (20) | 2500 |
| 104 (40) | 1100 |
| 176 (80) | 300 |