LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1989 >> Caravan Base, 2.5 K, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Systems - Optical >> Adjustments >> Ignition Timing Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Timing Procedure

  1. Attach a magnetic timing probe or connect a timing light to No. 1 cylinder. Start engine and run until normal operating temperature is reached.
  2. With engine at normal operating temperature, disconnect coolant temperature sensor. Radiator fan and "CHECK ENGINE" light should come on.
  3. Observe basic timing setting. Loosen distributor hold-down bolt and adjust timing if not within 2 degrees of specification given on Emission Control Label. Turn engine off. Remove timing device.
  4. Reconnect coolant temperature sensor. "CHECK ENGINE" light MUST go out. Erase fault codes using the "ERASE FAULT CODE" mode on a DRB-II. For more information, see appropriate article in COMPUTERIZED ENGINE CONTROLS section of this manual.
scientia non olet · About LEMON Manuals