October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Remove battery. Disconnect 10-wire and 6-wire connectors from computer. Remove outside air duct from computer. Disconnect vacuum hose from vacuum transducer.
- Remove 3 mounting screws that hold computer to fenderwell and remove computer. To install, reverse removal procedure.
NOTE:
Computer is not serviceable. Do not attempt to take it apart for any reason. Also, if the vacuum transducer becomes defective, entire computer must be replaced.