LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1982 >> Rampage Base, Standard Trans, Trans Mfr CD A412 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Electronic Fuel Control >> Testing >> Electronic Fuel Control System Tests >> Oxygen Sensor Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oxygen Sensor Test

  1. Set parking brake and connect tachometer. Run engine at 2000 RPM and connect voltmeter to solenoid-to-carburetor Green output wire. DO NOT ground carburetor switch. Hold choke blade closed. During the next 10 seconds, the voltage should decrease to 3 volts or less and maintain that level. If engine does not respond, go to step 2)  .
  2. Disconnect PCV system. During the next 10 seconds, the voltage should increase to 9 volts or greater and maintain that level until vacuum hose is reconnected. If sensor fails both tests, replace it. Reconnect all hoses and wires.
    NOTE: This test should not be performed for more than 90 seconds.
scientia non olet · About LEMON Manuals