LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Daewoo >> 2000 >> Lanos SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> Idle Learn Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Idle Learn Procedure

Whenever battery cables, powertrain control module (PCM)/engine control module (ECM), or fuse is disconnected or replaced, following idle learn procedure must be performed:

  1. Turn ignition ON for 5 seconds. Turn ignition OFF for 10 seconds. Turn ignition ON for 5 seconds.
  2. Start engine in park/neutral. Allow engine to run until engine coolant is above 85°C (185°F). Turn A/C ON for 10 seconds, if equipped. Turn A/C OFF for 10 seconds.
  3. If vehicle is equipped with an automatic transaxle, apply parking brake. While depressing brake pedal. place transaxle in "D" (drive). Turn A/C ON for 10 seconds, if equipped.
  4. Turn A/C OFF for 10 seconds. Turn ignition OFF. The idle learn procedure is complete.
scientia non olet · About LEMON Manuals