LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2022 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Removal And Installation >> With Integrated Screen >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Integrated Screen: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0178180Courtesy of CHRYSLER GROUP, LLC
  2. With a suitable tool, remove the radio trim bezel (1) and disconnect the wire harness connectors.
  3. Remove the radio to radio bezel screws, and remove the radio from the bezel.
scientia non olet · About LEMON Manuals