LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2022 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Removal And Installation >> With Display Screen Module >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Display Screen Module: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Display Screen Module (DSM). Refer to MODULE, DISPLAY SCREEN (DSM), REMOVAL AND INSTALLATION .
    GC0177186Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Radio Receiver Module (RRM) to instrument panel screws (2).
  4. Carefully remove the RRM (1) while disconnecting all of the wire harness connectors.
scientia non olet · About LEMON Manuals