LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2022 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Instrument Panel Cluster (IPC) >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
GC0177406Courtesy of CHRYSLER GROUP, LLC
  1. Position the Instrument Panel Cluster (IPC) close enough to the instrument panel to connect the instrument panel wire harness connectors to the connector receptacles on the back of the cluster housing.
  2. Position the IPC mounting tabs to the mounting holes in the instrument panel.
  3. Install and securely tighten the screws (1) that secure the mounting tabs of the IPC to the instrument panel.
  4. Install the gap hider. Verify the retaining tabs are fully engaged into the instrument panel.
  5. Install the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals