LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2022 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Global Telematics Box >> Removal And Installation >> Global Telematics Box Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Global Telematics Box Module: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the TBM2 to the TBM2 mounting bracket.
  2. Install the screws for the TBM2. Tighten the screws securely.
  3. Connect the instrument panel wire harness connector, the USB connector and the antenna connectors.
  4. Install the ICS. Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals