LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2022 >> Pacifica Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Body Control (BCM) >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Connect all wiring harness connections to the Body Control Module (BCM).
  2. Position and secure the BCM to the BCM bracket by engaging the BCM to the top bracket clips.
    GC0177484Courtesy of CHRYSLER GROUP, LLC
  3. Install and tighten the two lower mounting bolts (2).
  4. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals