LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2020 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Electronic Shift (ESM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Electronic Shift (ESM): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0170888Courtesy of CHRYSLER GROUP, LLC
  2. Using a trim stick or equivalent, remove the shifter bezel assembly (1).
  3. Disconnect the wire harness connector and remove the Electronic Shift Module (ESM) from the vehicle.
scientia non olet · About LEMON Manuals