LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2020 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Door (DDM/PDM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Door (DDM/PDM): Removal

GC0144728Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the trim panel from the inside of the front door. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect the wire harness connectors (3) from the door control module (2).
  4. Remove the fasteners (4) that secure the door control module to the front door hardware module carrier (1).
  5. Remove the door control module from the door hardware module carrier.
scientia non olet · About LEMON Manuals