LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2019 >> Pacifica L, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Power Inverter (PIM) >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

  1. Install the Power Inverter Module (PIM) in the vehicle.
    GC0188573Courtesy of CHRYSLER GROUP, LLC
  2. Install the PIM mounting fastener (2) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Connect the wire harness connector to the PIM connector receptacle (3).
  4. Install the PIM cover and remaining fasteners and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals