LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2019 >> 300 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Module, Radio Antenna >> Installation >> Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Radio Antenna: Installation: Module

GC0170609Courtesy of CHRYSLER GROUP, LLC
  1. Engage the mounting tab of the antenna module (2) into the slotted hole in the upper right C-pillar (1).
  2. Install and tighten the fastener (3) that secures the antenna module to the C-pillar. Tighten the fastener securely.
  3. Connect the wire harness connector (4) to the antenna module.
  4. Install the trim onto the upper right C-pillar. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
  5. Connect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals