LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Radio Frequency (RF Hub) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Radio Frequency (RF Hub): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. If equipped remove the sunshade. Refer to SUNSHADE, REAR WINDOW, REMOVAL .
  3. Remove the rear shelf cover. Refer to PANEL, REAR SHELF, REMOVAL .
    GC0170521Courtesy of CHRYSLER GROUP, LLC
  4. Remove the Remote Frequency Hub (RFH) retainers (1).
  5. If equipped, disconnect the remote start antenna (3).
  6. Remove the RFH from the vehicle.
scientia non olet · About LEMON Manuals