LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Park Assist (PAM) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Park Assist (PAM): Installation

GC0144523Courtesy of CHRYSLER GROUP, LLC
  1. Position the Park Assist Module (PAM) (1) to the right quarter inner panel above and behind the right rear wheel house. Be certain to engage the lower mounting tab into the stamped pocket in the right quarter inner panel.
  2. Reinstall the push-pin type retainers (3) that secure the PAM to the right quarter inner panel.
  3. Reconnect the body wire harness connectors (2) to the PAM connector receptacles.
  4. Reinstall the trim onto the right quarter inner panel.
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals