Module, Integrated Center Stack (ICSM): Removal
- Disconnect and isolate the negative battery cable.
- Remove the transmission shifter. Refer to SHIFTER, TRANSMISSION, REMOVAL
.
- Remove the two screws (2) securing the storage bin (1).
- Pull the storage bin out to release the retaining clips and position the bin to the side. The storage bin interconnects with the Integrated Center Stack (ICS). The ICS cannot be removed with the storage bin in the installed position.
- Using a trim stick or equivalent, pop the ICS loose from the dash.
- Disconnect the wiring harness connector (1) from the back of the ICS.
- Remove four screws (1) securing the ICS to the trim panel.