LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2017 >> 200 LX, Eng CD ED8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Control Modules (Service Information)) >> Module, Instrument Panel Cluster >> Removal >> Instrument Panel Cluster
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Instrument Panel Cluster

WARNING: This page is about a different car, the 2015 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    Fig 1: Instrument Panel Cluster Screws
    GC0162490Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four screws (1) that secure the Instrument Panel Cluster (IPC) to the instrument panel.
  4. Pull the top of the IPC rearward far enough to access and disconnect the instrument panel wire harness connectors from the connector receptacles on the back of the IPC.
  5. Remove the IPC from the instrument panel.
scientia non olet · About LEMON Manuals