LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 300 Base, RWD, Gas >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Camshaft Position: Installation: Installation

Fig 1: Camshaft Position Sensor, Connector & Bolt
GC0146584Courtesy of CHRYSLER GROUP, LLC
  1. Install Camshaft Position (CMP) sensor (2). Tighten bolt (1) to 8 N.m (71 in. lbs.).
  2. Connect the CMP wire harness connector (3).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals